Henan Ruike Medical Devices Co.,Ltd

Henan Ruike Medical Devices Co.,Ltd

86-0373-8996196

Henan Ruike Medical Devices Co.,Ltd
HomeProducts
PRODUCT CATEGORIES

All Products (Total 117 Products)

Disposable medical self-adhesive wound dressing

Model No.: 30X100mm

Disposable medical self-adhesive wound dressings are produced in a 100,000-level clean workshop. The product is mainly composed of adhesive tape, absorbent pad, and release paper. The products are produced by fully automatic production equipment. The four sides of the application are neat, without burrs, and the...
Sterile isolation gown for single use

Model No.: Type B: Siamese

The disposable isolation garment produced by our company uses non-woven fabric as the main raw material and is made by cutting, sewing/heating. Non-sterile provision, single use. Our company has advanced production equipment, and production technicians have more than ten years of production experience, and the quality...
Disposable medical gynecology bag

Model No.: Abortion

One-time use medical gynecological bags are produced in a 100,000-level clean workshop. The aborted gynecological bags are made up of disposable medical pads, disposable medical orifice towels, medical degreased gauze blocks, disposable surgical gowns and disposable sterilized rubber surgical gloves. Basic...
Medical absorbent cotton swab

Model No.: 10cm

Disposable medical cotton swabs are produced in a 100,000-level clean workshop. The product is mainly processed from bamboo sticks (or plastic sticks) and medical absorbent cotton; when disinfecting skin and wounds, the tools for applying drugs or disinfectants are not included. Medication or disinfectant. The...
Disposable sterile vagina dilator

Model No.:  Shaft Rotating

A single-use sterile vaginal dilator is composed of an upper lobe, a lower lobe and a handle. The upper and lower lobe and the periphery of the dilator should be smooth, without sharp edges and burrs. When the upper and lower lobes of the dilator are closed, the contact surface to the outer edge should be smooth....
Orifice towel for disposable treatment

Model No.: Type II

Disposable medical orifice towels are produced in a 100,000-level clean workshop. The holes of type II orifice towels are round holes and are processed by non-woven. The product is cut according to the order size on the stainless steel worksheet. After the cutting is completed, the holes are cut according to the...
Medical disposable hole towel

Model No.: Type III

This product is sterilized by ethylene oxide, and then analyzed in the compulsory analysis room after sterilization. The product is marketed in aseptic form; the product of our company uses better non-woven fabric for production, and the non-woven fabric has good breakage. Strength and elongation at break, and the raw...
Disposable isolation shoe cover

Model No.: Type II

Disposable medical isolation shoe covers are produced in a 100,000-level clean workshop. The main raw material of type II is non-woven fabric, and the weight of non-woven fabric is not less than 18 grams. The surface of the isolation shoe cover should be clean, uniform in color and non-woven. No stains and no damage....
Disposable medical paraffin cotton ball

Model No.: small

Disposable medical paraffin wax balls are produced in a 100,000-level clean workshop. This product is made of cotton balls soaked in liquid paraffin. The surface of the paraffin wax balls is clean, free of stains, impurities, and uniform in size; the single package of paraffin wax balls should The seal is firm and...
Cotton balls soaked in liquid paraffin

Model No.: large

Disposable paraffin wax balls are produced in a 100,000-level clean workshop. This product is made of large cotton balls soaked in liquid paraffin. The surface of the paraffin wax balls is clean, free of stains, impurities, and uniform in size; large paraffin wax balls Should not be less than 500g/100 grains. The...
Disposable band-type medical mask

Model No.: 17X9.5cm

The disposable band-type medical mask is composed of a mask body, a nose clip, and a mask belt; the product has a three-layer structure, the middle layer is made of melt blown cloth, and the remaining two layers are made of non-woven fabric. It is worn by various clinical personnel during non-invasive operations,...
Disposable ear-hanging medical mask

Model No.: 14.5X9.5cm

The disposable ear-hanging medical mask consists of a mask body, a nose clip, and a mask belt; the product has a three-layer structure, the middle layer is made of melt-blown cloth, and the remaining two layers are made of non-woven fabric. It is worn by various clinical personnel during non-invasive operations,...
Single use isolation mask

Model No.: Type II

Disposable medical isolation masks are produced in a 100,000-level clean workshop. Type II isolation masks are composed of protective covers made of polymer materials, foam strips and fixing devices; isolation masks should be clean, free of stains and dirt; should be complete , There should be no damage; the mask...
Single use endotracheal tube

Model No.: 2.0mm.2.5mm.3.0mm.3.5mm.4.0mm.4.5mm.5.0mm.5.5mm.6.0mm.6.5mm.7.0mm.7.5mm.8.0mm

The one-time use of tracheal intubation is produced in a 100,000-level clean workshop. This product is divided into non-cystic type and cystic type. The non-cystic type endotracheal tube consists of a tube body and a machine end connector; the cystic type endotracheal tube consists of the tube body , Inflatable tube,...
Single use airflow atomizer

Model No.: Type A1. Type A2

Disposable airflow atomizers are produced in a 100,000-level clean workshop. Type A1 and Type A2 are composed of catheters, universal joints, atomizing devices, and masks. The product should be sterile. After sterilization by ethylene oxide, the residual amount of ethylene oxide should not exceed 10ug/g. One-time use....
One-time use reinforced laryngeal mask

Model No.: Single cavity reinforced

The disposable medical laryngeal mask is produced in a clean workshop of 100,000 grade. This product is composed of air bag, inflation tube, laryngeal mask intubation, machine end joint, inflation valve, and indicating balloon. The main production equipment of this product is extruder and injection molding machine....
Disposable Medical Surgical Mask with Inner Ear Hanging

Model No.: 17X9.5cm

The disposable inner ear-hanging medical surgical mask consists of a mask body, a nose clip, and a mask belt; the product has a four-layer structure, the middle layer is made of melt blown cloth, and the remaining three layers are made of non-woven fabric. It is worn by clinical medical staff during invasive...
Sterile  vaginal dilator for single use

Model No.: Push-pull

A single-use sterile vaginal dilator is composed of an upper lobe, a lower lobe and a handle. The upper and lower lobe and the periphery of the dilator should be smooth, without sharp edges and burrs. When the upper and lower lobes of the dilator are closed, the contact surface to the outer edge should be smooth....
Disposable medical examination pad

Model No.: 40cmX40cm

The medical examination pad is made of non-woven fabric, toilet paper, polyethylene film by heat bonding or sewing. Hygiene care products for disposable hospital beds or examination beds. It does not include various surgical pads and drapes used in the operating room and delivery room. The company has advanced...
Disposable absorbent cotton pad

Model No.: Type B

Disposable medical cotton pads are produced in a 100,000-level clean workshop. Type B consists of a layer of absorbent gauze and a layer of sanitary non-woven fabric with a layer of absorbent cotton in between; absorbent cotton, non-woven fabric and absorbent gauze Used in medical consumables for many years, the...
Single Use  medical pad

Model No.: 90cmX120cm

Disposable medical pads are produced in a 100,000-level clean workshop. This product is made of non-woven fabrics, toilet paper, and polyethylene film by heat bonding or sewing. The non-woven fabric suppliers used by our company are long-term partners. The products can only enter the factory after they are inspected...
One-time use medical bill

Model No.: Type I

Disposable medical medium slips are produced in a 100,000-level clean workshop. The raw materials used in type I medium slips are made of thin adhesive non-woven fabrics. The product is cut according to the order size on a stainless steel work table with a jog cutter, and then folds neatly after the cutting is...
Sterile surgical gown for single use

Model No.: Medium

Disposable surgical gowns are produced in a 100,000-level clean workshop. This product is made of non-woven fabric; the non-woven fabric used in this product is non-woven fabric of not less than 40 grams, and the non-woven fabric has good breakage Strength, elongation at break, bursting strength and resistance to...
single use medical cotton sheet

Model No.: Non-developing type

Disposable medical cotton sheets are produced in a 100,000-level clean workshop. Non-developing cotton sheets are composed of a cotton sheet body and a string; the absorbent cotton used for the cotton sheet is white or off-white, with an average length of not less than 10 mm The fiber composition, without leaves,...
Home > Products

New Products

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send